1. Keep the proper distance between cutter and quilting machine (about 130cm). 2. Center both ends of quilting needles and cutting machine. 3. Level precisely left and right (leveling inside the frame), and front and rear (leveling the front part of guard rail chain at top and bottom rollers). 4. Connect the power (check if it is 220V or 380V). 5. Check the moving direction of roller. 6. Connect a compressor to the cutter and check if it works properly.

Address : 1000-285, Igok-Dong, Dalseo-Gu, DAEGU, KOREA   TEL : 82-53-586-3203   FAX : 82-53-586-3202